Laboratory Accessories

Digital Water Bath

Temperature range from few degrees above ambient temperature to 100ºC. These units are double walled with inner chamber made of Stainless Steel and outside of M.S duly enamel or powder coating painted. The gap between the walls is fitted with special grade glass wool in order to avoid thermal losses. A drain plug is also fitted to the unit, the inner chamber fitted with immersion type heating element is covered wih the unit as a standard accessory. Lid of Serological water bath is made of stainless steel. To work on 220/230 Volts A.C.

Chamber Size Suitable Racks Cap.(aprox)

300x175x175 1 rack 12 Liter
300x250x175 2 racks 14 Liter
375x300x175 4 racks 18 Liter
455x300x175 6 racks 25 Liter
605x300x175 8 racks 32 Liter

Features:

• Microprocessor PID digital temp. indicator cum controller.
• Auto cut off device when water level is low.

• Stirrer with 1/20 Hp motor with S.S. rod & blade.

Water Bath Precison (Constant temperature Control)

Controlled by microprocessor PID digital temp. Indicator cum controller. Toughened glass windows on two opposite sides for observation without disturbing temperature. Complete with stirrer. Temperature range 100°C. Auto cutoff device when water level is low.

Workable on 220 V AC 50 Hz Single Phase.

Specification:

Auto Colorimeter 8 filters with 16×2 lines LCD display for % transmission & optical Density Display. Soft touch Zero facility.

The harpenden skinfold caliper is a precision instrument designed for use in the performance of skinfold thickness measurements (from which estimates of body fat are derived). The use of this instrument has been well established and documented over the past 40 years.

The Harpenden Skinfold Caliper has been used all over the world on projects of international importance and is the most prestigious Caliper available.

It is the only Caliper CE marked under the Medical Devices Directive 93/42/EEC for a Class 1 Device with Measuring Function and is calibrated using masters traceable to National Standards.

• Dial Graduation: 0,20 mm
• Measuring Range: 0 mm to 80 mm
• Measuring Pressure: 10 gms/mm2 (constant over range)
• Accuracy: 99.00%
• Repeatability: 0,20 mm

Glass with bakelite screwing cap and absorbent plaster in base, without chemical.

Chromatography Columns, Plain with stopcock.

Effective : Dia.

Length cm mm.

20 10

30 15

50 20

60 25

60 40

100 50

115 100

180 100

Tubular balance made from fine plastic. Each range is color coded for easy identification. The balance can be used for both force and mass measurements. Spring action is clearly visible and zero adjustment is provided. Total length 250 mm.
Capacity Division

A. 250g/2.5N 5g/0.05N

B. 500g/5N 10g/0.1N

C. 1000g/10N 20g/0.2N

D. 2000g/20N 40g/0.4N

E. 3000g/30N 60g/0.6N

F.5000g/50N 100g/1.0N

Product Specification

With interchangeable ground glass/plastic stopper. PTFE key stopcock, made of borosilicate glass.

_{Separating Funnels are produced from Borosilicate 3.3 Heat resistant glass}

Students can compare rainfall of different seasons for a place and can conclude how wet a place is. The set of raingauge is provided with matel case having removable lid to collect rainfall and a plastic calibrated rain gauge jar duly marked in centimeters.

25*1/10mm

50*1/10mm

^{Specification :
Blood Bank Refrigerators is a most versatile unit for Blood Bank. The Inner chamber is made of Stainless Steel sheet and outer of PCRC sheet duly powder coated. Mounted on sturdy Iron frame with castor wheels for easy mobility. The temperature is maintained between 4 to 6 deg C with forced air circulation ensures uniform temperature, for storing blood bottles or blood bags. Temperature is controlled by Dual Display Microprocessor PID Digital Temperature Indicator cum Controller. Audio/Visual Alarms triggers in the event of temperature fluctuations. Unit is also fitted with Door Open alarm & Power Supply Failure Alarm as a safety devices.}

^{Highly efficient Refrigeration unit is housed on the bottom. Two doors are provided. Inner door is transparent made of plexiglass, for viewing inside the chamber. Drawers are provided for holding bags. Workable on 220 V AC.}

This is an electrical equipment to destroy used needles by burning and destroy syringe by cutting.
We can protect nursing staff and society from transmission of diseases due to needle stick injuries.

Model : HL 1212

Mains Input : 230v, 50Hz / 110v, 60Hz , AC

Body : Metal Body

Gauge Of Needles : Can Burn 30 to 20 Gauge]

Destruction Time : 1.5 to 3 Seconds

Burning Temp. : 1400° C to 1800° C

Weight : 2.1 Kg. Net

Overall Size : 155 (L) x 129 (W) x 86 (H) mm

Model: HL 1515

Model : HL 1515
Mains Input :230v, 50Hz | 110v, 60Hz , AC 

Body :ABS Plastic + Metal 

Gauge Of Needles :Can Burn 30 to 20 Gauge 

Destruction Time :1.5 to 3 Seconds 

Burning Temperature :1400° C to 1800° C

Weight :1.9 Kg. Net

Overall Size :160 (L) x 133 (W) x 92 (H) mm

Model: HL 1616

Model : HL 1616

Mains Input :230v, 50Hz

Body :Metal Body

Gauge Of Needles :Can Burn 30 to 20 Gauge

Destruction Time :1.5 to 3 Seconds

Burning Temperature :1400° C to 1800° C

Weight :1.9 Kg. Net 

Overall Size :155 x 128 x 86 mm 

Junker's Gas Calorimeter used in Petroleum Industries/Laboratory & R&D Centers, Coke Oven Batteries, Thermal Power House Cement Industries, Gas Companies, Steel Plants and Fertilizer Industries.
Junker's principal of Burning of known Volume of Gas under maximum efficient method of heat transferring conditions and imparting the heat to a stealing flowing water and finding out the amount of heat transferred. This is known as the calorific value of the gas. The equipment consists of calorimeter with burner on a tripod stand, Gas Flow meter (non-recording type) pressure Governor and DIGITAL TEMPERATURE INDICATOR.

Laboratory Table

These laboratory furniture are either fully manufactured with stainless steel sheet with external surfaced polished or structures with mild steel powder coated with stainless steel top or black Granite. The offered range of product can be availed by the patrons as per their requirements.

Features:

• Bottom support stand of floor leveling screws
• Sturdy construction
• Low maintenance

Other Details:

• Completely Made of pretreated GI sheets with epoxy powder coated finish
• Fully polished and round edged black granite working top
• Bottom support stand of floor leveling screws
• Hinges, door handles and other hardware are SS 304
• Hot & Cold water Mixer with swan Neck Tap & Sink

Product Details:

_{Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Hope''s Apparatus}

• _{To show that water has a maximum density at 4 degrees Celsius.}
• _{Consists of a sheet metal cylinder with two tubes in the upper and lower regions for inserting thermometers through rubber stoppers.}
• _{Mounted on a base and encircled midway by an outer trough for holding a mixture of ice and salt.}
• _{Temperature of the water is measured at the top and bottom of the inner cylindrical vessel over a period as the water-cools.}
• _{Thermometer not included.}

• Display temperature, humidity and time simultaneously
• It is `c / `f unit selectable
• Memory of max / min humidity and temperature readings
• Time in 12 am/pm or 24 hour format mode, date and month display,Alarm function and suitable for the desk-top placing or wall hanging

• The moving coil system is housed in aluminium case with an easily removably front sliding cover.
• Rectangular coil with a large moment of Inertia and a cross section is suspended with the help of a fine phosphor bronze suspension strip and moves in a strong magnetic field generated by a permanent magnet.
• The coil carries a 10mm circular concave mirror of 100cm of conjuction with a Lamp and Scale Arrangement.

These Grip Dynamometer are synonymous with excellent precision. Engineered following international industry standards, these Grip Dynamometer are widely acclaimed for their precised engineered, accuracy and optimum performance. Our Grip Dynamometer are available in various technical specifications as per the choices of clients.

Features:

• Resistant to weather
• Easy to install
• Superb quality

Description:

We hold expertise in manufacturing and supplying a wide range of blood cell counters. We engineer these blood cell counters following international medical standards and assure our clients for the optimum performance and accurate result through these blood cell counters. Entire range of these blood cell counters offered by us is hugely demanded owing to their high consistency and accuracy.

Features:

• Optimum performance
• Consistency
• Accuracy

Features:

· Digital imaging module: Wider dynamic range 2.0MP imaging module;

· Imaging software: Future Win Joe microscopic imaging program;

· Optical matching: Built-in relay lens and field lens;

· Adapter barrel: 23.2mm and 30.0mm and 30.5mm;

· Camera house: compact and light-weight round-shaped shell.

Function:

· To capture images for living show, for shoot and for video recording;

· To adjust the gain, resolution, WB, contras, exposure time, RGB color and Gamma setting;

· To edit pictures and to manage files of pictures and movies.

Benefits:

· Easy installation, convenient operation;

· Built-in relay lens to widen field and to have image sharp and bright;

· Compatibility with Win/MAC;

· High resolution of 2048*1536 for preview, picture shoot and video recording;

· Real active resolution, no interpolation, no jaggies in picture;

· Copyright software with 8 languages version.

Detail Specifications:

Application:

To update any type of optics microscope into digital microscope and to Increase the value of your microscope by adding powerful digital capability. It’s an affordable imaging solution for microscopy in industry, education, medicine and science.

Digital Dissolved Oxygen Meter 3½ digit LED display along with Gold/Silver probe mains operated.

Specification:

1. Do- fitted with small tube.

This model of evaporator is supplied complete with A.C. Non-sparking geared drive unit, support stand fitted with jack arrangement of stainless steel rod for positioning glass assembly, variable speed regulator, thermostatically controlled stainless steel water bath fitted on a jack, double coiled glass condenser with three opening for vacuum and cooling, pear shape evaporating flask capacity 800ml receiver flask capacity one litre with ball joint, feeding tube and vapor path tube, a complete working unit/ All parts are powder coated with epoxy/ polyester Hybrid, textured, Siemens, grey finish.

Automatic Electrically Heated All Glass single and Double Distillation Apparatus Complete with metallic stande, Plug, board etc.
Single Distillation
1. Single Stage Having Flask of cap. 3 Liter
2. Single Stage Having Flask of cap.5 Liter
3. Single Stage Having Flask of cap.10 Lite

Double Distillation
1. Double Stage Having Flask of cap. 3 Liter
2. Double Stage Having Flask of cap. 5 Liter
3. Double Stage Having Flask of cap. 10 Liter

Triple Distillation

1. Triple Stage Having Flask of cap. 3 Liter
2. Triple Stage Having Flask of cap. 5 Liter
3. Triple Stage Having Flask of cap. 10 Liter

Chrome plated brass, various size tubes, each with cutting edge at bottom and handle at top, with cleaning rod.

Specification:

A wind vane is an instrument for showing the direction of the wind. They are typically used as an architectural ornament to the highest point of a building.

Wind wane balanced with bearing mounted on painted steel pivot. Complete with metal base.

Feature :

• Measuring Range
• Accuracy:
• Resolution:
• Damping coefficient:
• Survival speed: max
• Temperature range:
• Electr. output: potentiometric
• Hysterese- + non wearing magnet clutch
• between vane and potentiometric axis
• Easy to be mounted and serviced
• Heatable

4”

5”

6”

8”

250ml
500ml