Laboratory Research Equipment

Exterior fabricated out of thick mild steel duly finished with powder coating. Interior made of richly anodised aluminium sheet or highly polished stainless steel.The gap between the walls is fitted with special grade glass wool. High quality Kanthal heating wire elements provided for heating. Force air circulation fans are provided for circulation to maintain equal temperature through out the chamber. Temperature from 30°C to 70°C  ±1°C controlled by digital temperature thermostat. the unit is provided with automatic tilting device, so to tilt the tray holding the eggs.

Tray is made of thick aluminium sheet.

An L-shaped prismatic thermometer is fitted to the unit for reading the chamber temperature. Equipment suitable to be working on 220V AC 50Hz single phase.

• Microprocessor Digital PID temperature indicator cum controller with temperature accuracy ±0.5°C
• Fitted with automatic tilting device with geared DC motor to tilt the tray holding eggs.
• Fitted with microprocessor based digital 7 days cyclic timer.
• Fitted with humidity arrangement in the chamber.

PRECISION WATER BATH which are thermostatically controlled and having double walled. Precision water bath having toughened glass windows on two opposite sides for observations without disturbing temperature. Temperature range of Precision water bath is 100°C. Workable on 220V AC 50 Hz Single Phase. Precision water bath Complete with stirrer.

Our PHYSILAB horizontal autoclave units are made of stainless steel to ensure corrosion resistance surface. Tipple/Double walled construction ensures excellent level of safety. Boiler is fitted separately and connected to the chamber. Water level indicator is also attached to the boiler. Automatic low water cut-off is optional and fitted on demand only. Each unit is fitted with automatic pressure control switch. User can easily set the desired temperature with the help of digital controller fitted on the front side of the unit. In order to achieve trustable tight sealing of door, we always use neoprene rubber gasket. In order to make our horizontal autoclave well suited to your application and to make your work easier, Before supplying to customer, our horizontal autoclaves are tested up to 30 psi pressure along with other parameters such as leakage, power control, temperature control, safety valves and important parts of the machine.

• Cylindrical / Rectangular design
• ISI marked flange / immersion heating elements
• Silicon rubber door gasket
• Digital Temperature controller
• Digital Timer and alarm (buzzer)
• Automatic pressure control switch
• Reliable steam pressure gauges
• Vacuum breaker and steam trap valve
• Brass safety valves
• Viewing glass water level check
• Automatic water level cut-off
• Powder coated / chrome plated MS Stand
• .Dia. x Height (mm) Volume (Liters)
• 400 x 600 75
• 400 x 1100 138
• 500 x 900 176
• 550 x 750 178
• 500 x 1200 235
• 600 x 1200 339
• 750 x 1200 552

General Purpose Laboratory Centrifuge Machine without Carbon

• Heavy duty C.R.C. construction finished with powder coating Fitted with brushless automatic balanced motor
• Microprocessor based, 4 lines, 20 characters. LCD Display of set time, run time, set and run rpm, rcf.
• Equipped with 0-99 minute timer.
• Programmable speed regulator to control speed from 500 to 6000 r.p.m depending upon the type of rotor & Fast spin option.
• 50 programmes can be stored in memory.
• Automatic rotor identification on display.
• Additional electronic lid lock which does not allow to open lid when machine is running.
• Dynamic brake (automatic) and imbalance detector are provided. Selection of 3 acceleration + 4 deceleration profile.

Autoclave

Made of Aluminium but Steel Finish. Also available in Electric / Non Electric (Fuel Based).

Special features:

Used for Sterilization of Surgical Instruments and Dressings.

Seamless Construction (Jointless) from Extra Thick Aluminum Sheet Good quality synthetic rubber Gasket for Longer and better performance and Hygiene.

Weight Type Safety Valve and Pressure Regulating Device for better safety and functioning.

Colored coded Pressure gauge (0-30 ibs/in2) to indicate the safe, sterilization and danger zones.

Highly strong and durable vacuum and steam release valves.

Handles and valve knobs made of very durable, heat resistant and fine quality bakelite.

Heating element made of heavy copper pipe for longer life.

Size: 300x300 mm

Outer made of M.S. sheet powder coated & inner chamber is made of thick S.S. sheet. The gap between two walls is fitted with high grade glass wool. The glass window makes it possible to inspect specimen without disturbing inner temperature. The unit has a temp. range from ambient to 60°C. Temperature is controlled by Dual Display Microprocessor PID Digital Temperature Indicator cum Controller with a accuracy of ± 0.5°C. Air circulation fan is provided to maintain stability throughout. Speed of shaker is variable from 30RPM to 250RPM. The tray of the shaker is also made of S.S. sheet with lotus type clamps to hold flasks. Unit is fitted with Digital RPM meter, 999 min digital time.

• Timer 0-24 hours
• 16 flasks of 100ml instead of 9 flasks of 250ml
• 9 flasks of 500ml or 25 flasks of 100ml instead of 16 flasks of 250ml
• 25 flasks of 250ml or 36 flasks of 100ml instead of 16 flasks of 500ml.

• High speed, high capacity bench top, Laboratory Centrifuge Machine, Microprocessor based

• Heavy duty C.R.C. construction finished with powder coating Stainless Steel centrifugal bowl for extra protection and easy cleaning.
• Fitted with well balanced brushless motor with electronic drive. Digital timer 0-99 minutes.
• 4 lines 20 characters LCD display for set time, run time, set & run rpm, rcf and rotor identification.
• 50 programmes can be stored in memory and automatic rotor identification on display.
• Additional electronic lid lock who does not allow to open lid when machine is running and opens automatically after centrifuge time is over.
• Dynamic brake (automatic) and imbalance detector are provided. Fast spin option.
• Selection of 3 acceleration + 4 deceleration profile. Programmable Speed Regulator from 2000 to 20000 in interval of 100 rpm
• Last test parameter recall and displays automatically on LCD Supply completed with instruction manual, cord & plug to work on 220 volts 50Hz A.C.

• Machine comes without rotor heads.

Outer body is made of thick mild steel sheet duly powder coated painted and inner chamber is made up of 304 grade Stainless Steel. Lid is also double walled properly insulated and is with locking facility. Whole unit is Mounted on a sturdy angle iron frame the cooling coils are brazed to the outer side of S.S. chamber thus ensuring perfect and uniform cooling. Insulation is done with thick glass wool to prevent any temperature loss. For attaining the temperature below ambient, the refrigeration is done through CFC FREE hermetically sealed compressor and & for attaining the temp. above ambient, heating is done with immersion type heating element. Fitted with stirrer for temperature uniformity throughout the chamber. Temperature range is from 5ºC to 90ºC is controlled by Dual Display Microprocessor PID Digital Temperature Indicator Cum Controller with a accuracy of ± 0.5 C Digital temp. To work on 220/230 volts AC supply. The unit is also fitted with a FHP PUMP for circulating the cooled liquid to an external source such as condenser coils, etc.

Tissue Flotation Bath is used for precise control of different samples at constant temperature.Tissue Flotation Bath an idea for tissue culture, enzyme reaction fermentations tissue section processing etc. Ideally suited for preparing distortion less and wrinkle free tissue specimens. This Tissue Flotation Bath is a round double walled, single piece Inner and Outer Chambers are made of aluminium, Inside black and outer surface finished in powder painted with wide enough rim for drying the wet of slides. Temperature is controlled by IMPORTED make capillary type thermostat from ambient to 70ºC with an accuracy of ± 2ºC. This Tissue Flotation Bath Completed with indicators. Wire and Plug.

Supplied complete with two Indicators.

Suitable to work on 220 V, single phase 50Hz A.C. supply.

• Grossing Table Made of high grade stainless steel

•Continuous air flow along entire work area.

•Integrated illumination with UV germicidal light.

•Working area of Grossing Table is 5’x2.5’x3’ and sides made from Acrylic material.

•Self supporting under carriage with adjustable legs.

•Adjustable set of stools with rest to reduce back strain.

•Dictaphone

•Camera holder on railing system

•Magnifying glass/light magnifier with flexible arms.

•Document holder for requistion forms, literatures etc.

•Magnetic instrument holder.

•Paper towel holder.

•Inch/centimeter ruler.

•Polythylene cutting board.

•Steel basin with adjustable valve with formalin pour off basin.

•Study perforated insertable work plates.

•Waste bin in Grossing Table.

•Sprinkler system with adjustable valve for bath sanitation located underneath the perforated working plates.

•Removable organiser bins in Grossing Table.

•Safety splash shield in Grossing Table.

•Drawers in Grossing Table

Size 150x75x90cm.

Autopsy Table :-

PHYSILAB Autopsy Table is in All S.S Construction Tubular Sturdy Support Frame work.Non -Skid Bushes Filled to legs. One end mounted integrated Large S.S Wash basin with two Free Rotating Faucet and one long reach hand shower.Autopsy Table Built -in-under-table drain

Technical Specifications of our Autopsy Table:

• Overall Length of Autopsy Table = 8'-7"
• Overall Width of Autopsy Table=8'-7"
• High of Table= 3
• Cadaver table equity Length=6'-6
• Cadaver table equity Width =2'-2.5"
• #No. of S.S Cadaver Support=3
• No. of S.S Head Support in Autopsy Table=1
• No. of faucets in Autopsy Table=3 (2 fixed Rotatable and 1 Hand shower.)

Microprocessor UV-VIS Spectrophotometer (Double Beam) with Two Cuvette

Technical Specification:

• Monochromator :Double Beam Equipped with high resolution concave diffraction grating and seya Namioka mount.
• Optical System:Double Beam, Grating 1200 lines/mm
• Wavelength Range:190nm - 1100nm
• Spectral Bandwidth:1nm
• Wavelength Accuracy:<=+/0.1nm (656.1nmD2),<=+/0.3nm(full wavelength Range)
• Wavelength Repeatability:0.1nm
• Photometric Accuracy:±0.3%T(0~100%T)
• Photometric Repeatability:0.001Abs(0~0.5Abs)
• Photometric Range: -3A~3A
• Stray Light: <=0.02%T(220nm,nal,340nm NaMO2)
• Stability: ±0.0004 A/H@500nm
• Baseline Flatness: ±0.001A
• Noise:0.0003 A/H
• Scanning Speed:Fast, Mid, Slow
• Wavelength Setting:AUTO
• Keyboard: Membrane Keypad
• Light Source:Deuterium & Tungsten Lamp
• Wavelength Resolution:0.1nm
• Photometric Mode: A.T.C
• Detector: Silicon Photodiode
• Interface: USB Portandparallelport (Printer)
• Power: AC 220V/50Hz or AC 110V/60Hz
• Dimension: 590x460x220mm
• Weight: 25 Kg
• Drift: <=+/0.0004A bs/h
• Cell Holder : 2 Cell Holder

Salient Features:

• Wide Wavelength range, satisfying requirements of various fields.
• Fully automated design, realizing the simplest measurement & satisfying the requirement of pharmacopoeia.
• Maximum of 9 Wavelength & 1 samples can be measured at one time.
• Automatic change-over between T lamp & D2 lamp.
• Optimized optics and large scale integrated circuits design, light source and receiver from world famous measurement methods all add up to high performance and reliability.
• Rich measurement methods : wavelength scan, time scan multi-wavelength determination, multi-order derivative determination, double-wavelength methods and triple-wavelength methods etc, meet difference measurement requirement.
• 10mm 2-cell holder.
• Data Output can be obtained via a printer port and a USB interface.
• Parameters and data can be saved for user's convenience.
• PC controller measurement can be achieved for more accurate and flexible requirement.

Model Hlsi - 19185

Features:

• These are double walled unit.
• Outer made of M.S. Sheet duly enamel or Powder Coated paint.
• Innermade of heavy gauge stainless steel sheet (304 grade)
• Temperature is controlled by Microprocessor Based PID Digital Temperature Indicator cum Controller with an accuracy ± 1°C.
• Provided with vacuum gauge.
• Precise vacuum range from 5°C  above room temperature to 150 with ± 2°C accuracy.
• Precise vacuum control to 28 (70.2cm) Hg displayed on analog gauge.

Size:-

• Round Vacuum oven : 250mm(Dia)x250mm(Depth)
• Round Vacuum oven : 300mm(Dia)x300mm(Depth)
• Round Vacuum oven : 300mm(Dia)x500mm(Depth)

Muffle furnace (Laboratory Model) is Light weight with ceramic fibre wool installation in place of refractory bricks. Working temperature 900°C. Maximum temp. 1000°C fitted with by Dual Display Microprocessor PID Digital Temperature Indicator cum Controller, CI/AL thermocouple. Heating elements are made up of Kanthal wire. Workable on 220V AC 50Hz single phase.

Inner Muffle Size (mm) Inner Muffle Size (mm)
225x100x100 9"x4"x4"
250x125x125 10"x5"x5"
300x150x150 12"x6"x6"
300x200x200 12"x8"x8"
350x225x225 18"x9"x9"

Optional:-

• Digital 0-99 Hrs Timer

• 3 kg
• 5kg
• 10kg          

Similar to other water baths but fitted with inbuilt shaker for different experiments demanding shaking at constant speed under controlled temperature conditions. the temp. is controlled by capillary type thermostat from ambient to 100°C.

RPM range: 40-140 with variable electronic speed regulator.
Workable on 220V AC 50Hz single phase.

Chamber size in mms                      Capacity(L)
275x275x150                                          12L
405x300x150                                          18L

Our Shaker Suitable for other agglutinating tests, blood grouping tests, for mixing of solutions in small flasks, beakers or bottles. Platform size 300x300mm. supplied 9 Flask Holders for holding flasks. Fixed or variable RPM range 180 RPM. With 60 min timer.

Workable on 220 V AC 50 Hz Single phase.

OPTIONAL (EXTRA COST)
Digital R.P.M. indicator
Digital Timer (0-99 min.)

• It is required in biotechnology, Molecular Biology applications in colleges, Universities, Research Institutes.
• It is meant for Nucleic Acid (DNA-RNA) characterization.
• These are also called Submarine Electro-phoresis Unit/Agrose Gel/Poly
• Acrylamide Gel Electrophoresis (Mini size)
• The unit is jointless, moulded of transparent Polycarbonate to avoid leakage.
• It is fitted with 2 Platinum Electrodes and supplied with transparent jointless safety lid which is also made of polycarbonate.
• It is completed with Buffer chamber, safety lid with cables

Specifications:

• It is required in biotechnology, Molecular Biology applications in colleges, Universities, Research Institutes.

• It is meant for protein characterization.

• The buffer chamber is jointless, moulded of transparent Polycarbonate to avoid leakage. The unit is based on Acrylic sheet fitted with 3 leveling screws. Complete with Acrylic cover.

• Wires black and red - 1 each

• Glass plate-1 and 1 notched rectangular Total 2nos.
• One set spacers of 1.0mm,1.5mm - 4 pcs. each
• 4 sets of Nylon moulded combs of 7 wells & 10 wells in 0.1mm and 1.5mm thickness

• Silicon Gasket - 1 No

• The buffer chamber is made out of single moulded piece to avoid leakage of buffers It is made of transparent poly carbonate.
• The unit have 2 Platinum electrodes, supplied with their banana sockets defined in black and red colour.
• Horizontal paper strip holder to adopt 3 pare strips is supplied with horizontal unit.
• Vertical strip holder to adopt 3 paper strip in vertical position is supplied with vertical unit.
• Supply complete with respective protection cover, red and white cables.
• To work on 220 volts 50Hz A.C.

• The buffer chamber is made out of single moulded piece to avoid leakage of buffers.

• It is made of transparent poly carbonate.
• The unit have 2 Platinum electrodes, supplied with their banana sockets defined in black and red colour.
• Horizontal paper strip holder to adopt 3 pare strips is supplied with horizontal unit.
• Vertical strip holder to adopt 3 paper strip in vertical position is supplied with vertical unit.
• Supply complete with respective protection cover, red and white cables.

• To work on 220 volts 50Hz A.C.

Model HLSI-19202

Characteristics:

The monochromator with a holographic flashing grating is used. Microprocessor - Visible Spectrophotometer has the advantage of high wavelength precision, good monochromaticity and low stray light.

Microprocessor - Visible Spectrophotometer has automatic switching of tungsten halogen lamp and deuterium lamp.

Microprocessor - Visible Spectrophotometer - A sample compartment for 0.5cm-10cm cells.

Computer control system, precise automatic T/A changeover.

This Microprocessor - Visible Spectrophotometer provide automatic zero and full scale adjustment

Direct concentration read-out and concentration factor setting function is provided in this Microprocessor - Visible Spectrophotometer

• Wavelength Range325 - 1000 nm
• Wavelength Accuracy< 2nm
• Wavelength Repeatability<1nm
• Transmittance Accuracy±0.5%
• Transmittance Repeatability<0.2%
• Spectrum Bandwidth2nm
• Stray Light<0.5% (at 360nm, NaN0₂)
• Light Current Drift0.5% / 3 min
• Dark Current Drift0.2% / 3 min
• Cell Holder Dimensions10 mm
• Nett Weight13.5 Kgs Gross Weight27Kgs

Model HLSI - 19201