Chemistry Equipment

An instrument of great stability for quick, accurate handling. Life time stainless steel scales verniers and fine achromatic optics that make this a precision instrument of universal choice for normal experiments and for researches. The instrument is designed for use in the vertical and horizontal planes. The vertical guide bar is made of gun-metal and is of a special type. It rotates on ball centres having bearings and can be clamped in any position. The cast iron frame which support the vertical guide bar, is fitted with levelling screws. Range either 50 cm or 100 cm erector tube which can be screwed
a) 50 cm long graduated bar
b) 100 cm long graduated bar

• Measuring 0 to 50cm or 0 to 100cm
• Range
• Length of 103mm
• Scale
• Magnification of 10x
• Telescope
• Visual Distance 100 cm to infinity
• Graduation 0.5mm in division

_{The body of the mantel is one piece M.S duly powder coated. It withstands high temperature up to 350 Degree C. All heating mantels are lagged with special grade glass wool. Work on 220/230 V AC.}

_{Capacity/Wattage}

• _{50ml 60 Watt}
• _{100ml 60 Watt}
• _{250ml 150 Watt}
• _{500ml 200 Watt}
• _{1 litre 300 Watt}
• _{2 litre 450 Watt}
• _{3 litre 600 Watt}
• _{10 litre 2x500 Watt}

Teclu Burner gives a very hot flame. Heavy gauge nickel plated brass tube of 12 mm diam. with air regulating disc, jet, inlet tube and gas control needle valve, on heavy die pressed metal base.

HL-680 model microwave test benches offered by us are used in meeting the experiment demands to measure dielectric constant of solid & liquids. Further, these are also used to measure phase shift & 'O* of a cavity. Some of the experiments these are used in include:

Experiments:

• To Study the Characteristic of Reflex Klyston.
• To Study the frquency, guide wavelength & free space wave length.
• To measure SWR & reflection co- efficient.
• To measure impedance of a load.

• Type : Table Clamp
• Vertical Movement Of Counterbalanced Arm : 400 mm
• General Information
• Weight : 50Kg.
• Height : 1550mm
• Electrical Power : AC 220V, 240V, 50/60 Hz
• Power Consumption : 220 VA/110V

Suppository Moulds

Physical Suppository Moulds: Made from brass/gun metal machine made perfect shapes smooth and polished cavities. Nickel plated various capacities with a number of mould in each set.

Capacity:-

A.) 1 gm

B.) 1.5 gms

C.) 2 gms (15.4grains).

1)4-moulds set

2) 6-moulds set

3) 12 moulds set

Note:Other sizes and capacities on request can be supplied

A sensitive compass box mounted at the centre of a non-magnetic wooden base about one meter long (Sunmica Top), a metric scale extending outward from each side of the compass box for observing the position of the magnet tested. The compass direction is indicated in degrees. Dimension 40"x5" with aluminium cup at the centre for holding compass box. Supplied with compass but without magnet.

The electroscope is our oldest electrical measuring device; the very first electroscope was a pivoted needle dubbed the versorium.  Today we utilize its more complex cousin, the gold leaf electroscope.  These electroscopes allow their user to detect the presence and magnitude of electrical charge on a body, which makes them excellent instruments for demonstrating the principles of electrostatics. 

Our Deluxe Gold Leaf version has several features which set it apart from lesser versions, making it an excellent addition to classrooms in which it will be used frequently.  The metal case is durable and strong, capable of resisting accidents and breakage.  The glass panels slide out to facilitate replacement of ripped gold leaves, and the back panel is frosted, lending some aesthetic appeal.  There is also a scale inside which makes comparative measurements simpler.  Lastly, the electroscope has a grounding connector on the side of the box.  Excellent quality, perfect for physics demonstrations.

Features:

• Measures magnitude of electrical charge
• Durable metal casing
• Slide-out glass panels
• Gold leaf can be replaced
• Scale for ease of measurement
• Grounding connector
• Great for the classroom

Teakwood batons fabrication. Adjustable strap for putting sufficient pressure. Spirit polish finished.

Size 45 cm x 30 cm.

Meker Burner with Stop Cock

For high temperature work. Nickel plated burner tube with perforated plate of 25 mm diam. at top, which provides flame stability and ensures high and evenly distributed temperature. With rotatable air regulator around the jet. Heavy wide die pressed metal base of 80 mm diam. With riffled gas inlet, overall height 150 mm.

Technical Specifications:

· Bench top Digital Microprocessor based Serum centrifuge Machine with LCD display

· The body is made of rust proof ABS injection moulding with metalic protection bowl.

· Fitted with microprocessor based pre programable speed controller to control speed from 500 - 3000 r.p.m. in the interval of 250 r.p.m.

· Digital Timer 0-99 minutes

· 2 lines of 16 character LCD display of r.p.m., R.c.f, set time and run time

· Programme remains in memory and displays on LCD. Just push start button and the machine will run on programmed time and speed.

· To work on 220 volts 50 Hz A. C.

Dimension of Machine:

L = 395mm

W = 360mm

H = 280mm

Weight of Machine:

12.5kg. Approx.

Gross weight of Machine :

14 kg. (with box)

Porcelain, glazed inside and outside, complete with lid.

Diam., mm Ht., mm Capacity, ml
41 20 10
42 25 15
43 28 18
48 30 25
60 37 50
67 42 80
82 44 100
92 52 150
108 58 200
118 67 250
119 85 500

Our company offers table top model of Barnstead Type Water Still to the clients. The complete unit of barnstead type water still is made from stainless steel along with complete argon welding. The high quality kettle type immersion heater is provided with our highly efficient Manesty Type Water Still. We also inculcate water level and drain facility in this barnstead type water still for efficient working.

Features :-

• Heavy gauge top mounted S.S. flange.
• Accurate and pyrogen free distill water.
• High quality Kettle type immersion Heaters.
• Opening type condenser for periodic cleaning by opening flange.
• Water level and Drain facility.

Cork Press

Cast iron, painted, mounted on polished wooden base, for softening corks. To accommodate corks upto 32 mm diam.

With perforated plate of 43 mm dia., overall height 180 mm, for higher temperatures..

Comprises a copper vessel, with terminals and perforated shelf, thick zinc rod with brass terminals and porous pot capacity pot, capacity 600 ml.