Lab Plasticware

Measuring Cylinders

Measuring Cylinders, moulded in Polypropylene are single piece cylinders. These autoclavable cylinders have raised prominent graduations for easy reading and have excellent contact clarity. The broad base provides good stability.

Pipette Stand (Horizontal)

This detachable stand can hold 12 pipettes, 6 on each side, in a horizontal position. Moulded in polypropylene, this autoclavable stand has two sides which are attached to each other with three metallic rods coated with polypropylene. This stand can be easily disassembled for space saving storage.

Pipette Stand (Vertical)

This is a stable, non-corrosive, detachable stand which can hold 28 pipettes with maximum dia 14 mm. The heavy base measures 225 mm in diameter and a Polypropylene coated square rod measuring 375 mm in length is screwed into the base. The top discs that can be fixed on the rod has holes for holding pipettes while the lower one has pilot holes where the pipette tips rest and liquids drain down to the base. These discs can be adjusted on the rod according to the length of the pipette. The arrows provided on the dissc should be kept parallel to ensure that corresponding holes are being centered.

Pipette Stand (94 Pipettes-Rotary)

Moulded in polypropylene, this unique stand holds a maximum of 94 pipettes and rotates on a central vertical axis for convenient selection of any particular pipette. The lower rotating disc has four concentric troughs with tapered sides and open bottoms which cradle the pipette tips protectively and permit water drops to run off. The upper disc has a grid pattern concentric with the bottom disc and keeps the pipettes vertical. Liquids draining off the pipettes are retained on the top of the stationary base by the outer ring. This stand can be easily disassembled & reassembled.

Conical Measures

These Conical Measures are very good for measuring small quantities of reagents. Moulded in Polypropylene, these autoclavable Measures have a hexagonal base which provides it excellent stability.The Measures are clear, have good chemical resistance and have raised graduations for easy reading.

Rack for Micro Centrifuge Tubes

Moulded in Polycarbonate, these autoclavable racks are made for holding 1.5 ml. Micro centrifuge tubes. These racks have a unique stacking feature which prevents movement in any direction. The holes are numbered & lettered for easy identification.

Test Tube Stand 

This autoclavable stand is perhaps the most commonly used test tube stand in various laboratories. For better visibility, this 6 place rack is end supported by 2 columns. The top plate has 2 holes for holding 25 mm dia test tubes, four holes to hold 16 mm dia tubes where as the base has corresponding hemispherical wells. It also has six vertical pins for drying tubes. Another option available in this section is a test tube stand in which all the holes in the top plates can hold 25 mm dia tubes.

Test Tube Stand (Round)

A handy, little, space saver, this circular twelve place polypropylene test tube stand has four 25 mm dia holes & eight 19 mm dia holes in its top plate. The base has matching hemispherical wells & 16 vetical pins for drying tubes surrounded by a trough to catch drippings. This autoclavable rack can be easily disassembled for cleaning purpose.

Test Tube Stand (3 Tier)

These ingenious racks with a 3-tier design provide clear view of the tube contents & convenient insertion & removal of tubes. The PC Rack has transparent upper & middle plates where as in PP racks, every part is colored & opaque. These autoclavable racks can withstand sub-freezing temperatures.

Trays

Laboratory Tray moulded in polypropylene is a multipurpose tray that can be used for sterilizing, drying glassware,porcelainware & other laboratory instruments.These steam autoclavable trays have tapered walls which prove good for nesting.

Volumetric Flask

Volumetric Flasks, blown in Polypropylene, are strong, unbreakable and have a good contact clarity. These autoclavable flasks are provided with screw caps to prevent leakage.

Test Tube Basket

Test Tube Baskets are made of Polypropylene.These autoclavable,unbreakable and non-corrosive Baskets are ideal for rinsing & draining glassware.These are also useful for storage of test tubes or culture tubes during sterilization or incubation.

Draining Basket

As the name suggests, this basket with wide net like structure on all sides prove really useful for draining different laboratory appratus after washing them. Made of polypropylene,this basket can be reapeatedly autoclaved.

Rack for Petri Dishes

These Racks are clear acrylic construction with polycarbonate posts. It has a capacity to hold 60 petri dishes of 90 mm size while in other one can hold 56 petri dishes of 60mm. These racks are very useful during inoculation, incubation & Storage. Visibility from all sides enables the culture to be seen & checked during incubation.