Beakers,Sample Container (Press & Fit Type), Laclanche Cell Pot,Simple Cell Pot, Storage Boxes, Magenta Box, Draining Rack, Carrier Tray, Utility Tray,Laboratory Tray,Plantation Pots, Pneumatic Trough,Micro Pestle,L Shaped Spreader,Soft Loop Sterile,Policemen Stirring Rods,Stirrer,Pipette Stand(94 Pipette-Rotary),Pipette Box,Reagent Reservoir,Universal Reagent Reservoir,Ice Bucket,Staining Box,Measuring Cylinders, Measuring Cylinders Hexagonal,Measuring Cylinders Pentagonal,Measuring Jugs,Measuring Jugs(Euro Design) ,Conical Measures,Seperatory Funnel,Spatula,Cell Scraper,Petri Dish (Disposable),Rack for Petri Dishes,Universal Multi Rack,Nestler Cylinder Stand,Test Tube Stand,Test Tube Stand (Round),Rack For Micro Centrifuge Tubes,Test Tube Stand (3Tier),Test Tube Stand (Wire Pattern),Rack For Micro Centrifuge (Folding),Test Tube Baskets, Draining Baskets, Pipette Stand (Horizontal),Pipette Stand (Vertical),Storage Vial With O-Ring,Storage Vial Internal Thread,SV10-SV5, Scintillation Vial,Rack for Scintillation Vial,Cryo Vial- Internal Thread,Cryo Vial,Cryo Coders,Cryo Rack,Cryo Box (PC),Cryo Box (PP),Immunology Plates,Micro Tip Box,Micro Tip Box (New),Volumetric Flask,Float Rack,MCT Twin Rack,PCR Tube Rack,MCT Box,Centrifuge Tube Conical Bottom,Centrifuge Tube Round Bottom,Oak Ridge Centrifuge Tubes,Urine Container,Stool Container,Ria Vial,Ria Vial With Screw Cap, Test Tube Cap,Storage Vial,Desiccator (Plain),Stop Cocks, Kipp's Apparatus,Funnels - Long Stem,Buchner Funnel, Analytical Funnel,Petri Dish,Petri Dish (Culture),Atomic Model Set,Atomic Model Set (Euro Design),Crystal Model Set,Coplin Jar.
|
Laboratory Beakers | | Item Code:HL-4001 Laboratory Beakers, moulded in polypropylene, have excellent clarity and very good chemical resistance. These autoclavable Beakers have prominently raised graduations on the outer surface. Pouring a solutions becomes very convenient because of its tapered spout.
Material : Polypropylene
| Code No. | Particular | Least Count | Packing | | 11101 | 50 ml | 5 | 12Pcs. | | 11102 | 100ml | 5 | 12Pcs. | | 11104 | 250ml | 10 | 12Pcs. | | 11105 | 500ml | 10 | 12Pcs. | | 11106 | 1000ml | 25 | 6Pcs. | | 11107 | 2000ml | 250 | 6Pcs. | |  | | Send Enquiry | |
Sample Container | | Item Code:HL-4002 Made for polypropylene, these disposable containers are used for collecting samples of sputum ou urine etc. Graduated on the outer surface, these containers have cap that works in a press & fit manner & make these containers leakproof. These disposable containers are E.T.O. sterlized.
Material :Polypropylene
| Code No. | Perticulars | Packing | | 11108 | 50ml | 100Pcs. | | 11109 | 25ml | 200Pcs. | | | | Send Enquiry | |
Laclanche Cell Pot | | Item Code:HL-4003 Blown in polypropylene, this pot is used for making leclanche cell. This pot too has very good contact clarity & excellent chemical resistance.
Material :polypropylene
| Code no. | particulars | packing | | 11110 | laclanche cell pot | 12pcs. | | | | Send Enquiry | |
Simple Cell Pot | | Item Code:HL-4004 Simple cell pot, as the name suggests, is used for making Simple Cells & Voltmeters etc. Moulded in Polypropylene, this Pot has very good contact clarity and excellent chemical resistance. Being in Polypropylene, this Pot is much durablethan the one used conventionally.
Material :Polypropylene
| Code No. | Perticulars | Packing | | 11111 | Simple Cell Pot | 12Pcs. | | | | Send Enquiry | |
Storage Boxes | | Item Code:HL-4005 These Storage Boxes, made of Polypropylene, prove to be an excellent option for storage of different powdered reagents & other material in the laboratory. Square shape of these boxes help in saving shelf space. Available in two different sizes, these boxes have polypropylene caps, are autoclavable, provide good chemical resistance & heavy duty service.
Material :Polypropylene
| Code No. | Particular | Packing | | 11112 | 250ml | 12Pcs. | | 11113 | 500ml | 12Pcs. | | 11114 | 1000ml | 12Pcs. | | | | Send Enquiry | |
Magenta Box | | Item Code:HL-4006 Magents box is very often used in tissue culture & agricultural research experiments. Main body of this box is made of tough & transparent Polycarbonate which provides excellent view of the contents inside while the cover is made of Polypropylene. This autoclavable box is square in shape giving itself a space saving feature.
Material :Polycarbonate / Polypropylene
| Code No. | Perticulars | Packing | | 11115 | Magenta Box | 12Pcs. | | | | Send Enquiry | |
Draining Rack | | Item Code:HL-4007 Polylab draining rack provides an excellent option for post wash draining of tubes & bottles in the laboratory. The back plate has 20 holes into which pegs are tightened with the help of screw nuts. Bottom of the rack is provided with a tray which collects all the waste water drained down which can further be collected in a container via drain tube. This rack does not rot, stain or rust.
Material :Acrylopitrile butadiene styrene / polycarbonate
| Code No. | Perticulars | Packing | | 11116 | Draining Rack | 1Pcs. | | | | Send Enquiry | |
Carrier Tray | | Item Code:HL-4008 This autoclavable polypropylene tray has a unique feature i. E. Its handle which proves really helpful in carrying reagents or laboratory apparatus from one place to another, single handedly.
Material :polypropylene
| code no. | perticulars | packing | | 11117 | 380x240x115mm | 6pcs. | | | | Send Enquiry | |
Utility Tray | | Item Code:HL-4009 Adding to the already existing range of autoclavable laboratories trays, is the utility tray and as the name suggests this Polypropylene tray can be utilized for purposes ranging from drying glassware to sterilizing and to store any laboratory apparatus.
Material :Polypropylene
| Code No. | Perticulars | Packing | | 11118 | 375X350X130mm | 6Pcs. | | | | Send Enquiry | |
Laboratory Tray | | Item Code:HL-4010 Needless to say, polylab laboratory tray moulded in Polypropylene is a multipurpose tray that can be used for sterlizing, drying glassware, porecelainware & other laboratory instruments. These steam autoclavable trays have tapered walls which prove good for nesting.
Material :Polypropylene
| Code No. | Perticulars | Packing | | 11119 | 450X350X75mm | 1Pcs. | | 11120 | 375x300x75mm | 10Pcs. | | | | Send Enquiry | |
Plantation Pots | | Item Code:HL-4011 Polylab plantation pots, moulded in polypropylene, are available in three different sizes. These pots have a downward extended rim which provide convenient lifting even if the pot is filled. The bottom of the pot is provided with holes for drain purpose.
material :polypropylene
| Code no. | perticulars | packing | | 11121 | 100mm | 20pcs. | | 11122 | 150mm | 20pcs. | | 11123 | 200mm | 20pcs. | | 11124 | 250mm | 20pcs. | | | | Send Enquiry | |
Pneumatic Trough | | Item Code:HL-4012 These troughs, made of polypropylene, are autoclavable and are available in different sizes. These can be used for a wide range of purposes including storage, sterilizing & drying labware etc.
Material :polypropylene
| code no. | perticulars | packing | | 11125 | ø-180 x h-60mm | 6pcs. | | 11126 | ø-200 x h-100mm | 6pcs. | | 11127 | ø-250 x h-100mm | 4pcs. | | | | Send Enquiry | |
Micro Pestle | | Item Code:HL-4013 This double eneded pestle's one end fits 1.5ml. Micro centrifuge tube & the other one fits 0.5ml. Micro centrifuge tube.
Material :Polypropylene
| Code No. | Perticulars | Packing | | 11128 | Micro Pestle | 100 Pcs. | | | | Send Enquiry | |
L Shaped Spreader | | Item Code:HL-4014 This sterile, smooth spreader enables even spreading of liquid samples across the surface of a jar plate without grouping & cutting the medium.
Material :Polypropylene
| Code No. | Perticulars | Packing | | 11129 | L Shaped Spreader | 100 Pcs. | | | | Send Enquiry | |
Soft Loop Sterile | | Item Code:HL-4015 This non-toxic disposable loop is accurate to semi quantitative stand for handling samples
Material :Polypropylene
| Code No. | Perticulars | Packing | | 11130 | Soft loopes - 1µl | 100 Pcs. | | 11131 | Soft loopes - 10µl | 100 Pcs. | | 11132 | Inoculation Needle | 100 Pcs. | | | | Send Enquiry | |
Policemen Stirring Rods | | Item Code:HL-4016 This, infact, is a multipurpose apparatus which works as a stirrer as well spatula. The fattened ends of this rod form two small spatulas.
Material :Polypropylene
| Code No. | Perticulars | Packing | | 11133 | Ø- 6 mm x h-245 mm | 12Pcs. | | | | Send Enquiry | |
Laboratory Stirrer | | Item Code:HL-4017 Made of polypropylene, these Stirrers are very useful for stirring different solutions in the laboratory. These Stirrers prove to be tough and long lasting.
Material :Polypropylene
| Code No. | Perticulars | Packing | | 11134 | Ø- 10 mm x h-250 mm | 12Pcs. | | 11135 | Ø- 7 mm x h-200 mm | 12Pcs. | | 11136 | Ø- 7 mm x h-250 mm | 12Pcs. | | 11137 | Ø- 7 mm x h-300 mm | 12Pcs. | | | | Send Enquiry | |
Pipette Stand (94 Pipette-Rotary) | | Item Code:HL-4018 Moulded in Polypropylene, this unique stand holds a maximum of 94 pipettes and rotates on a central vertical axis for convenient selection of any particular pipette. The lower rotating disc has four concentric troughs with tapered sides and open bottoms which cradle the pipette tips protectively and permits water drops to runoff. The upper disc has a grid pattern concentric with the bottom disc and keeps the pipettes vertical. Liquids draining off the pipettes are retained on the top of the stationary base by the outer ring. This stand can be easily disassembled & reassembled.
Material :Polypropylene
| Code No. | Perticulars | Packing | | 11138 | For 94Pipettes | 1Pcs. | | | | Send Enquiry | |
Pipette Box | | Item Code:HL-4019 Made of polypropylene, this pipette box is designed is such a way that it can hold Pipettes of different lengths. The top of the box xcrews on the bottom and the height can be adjusted by screwing or unscrewing the top
Material :Polypropylene
| Code No. | Perticulars | Packing | | 11139 | Pipette Box | 4Pcs. | | | | Send Enquiry | |
Reagent Reservoir | | Item Code:HL-4020 Moulded in polypropyllen, this autocalvable reagnet reservoir is helpful for multi-channel pipetes to be used into microtiter plates.
Material :polypropylene
| Code no. | perticulars | packing | | 11140 | 75 ml | 12pcs. | | | | Send Enquiry | |
Universal Reagent Reservoir | | Item Code:HL-4021 Moulded in Polypropyllen, this autocalvable reagent reservoir is helpful for multi-channel pipetes to be used into microtiter plates.
Material :Polypropylene
| Code No. | Perticulars | Packing | | 11142 | 50 ml | 6Pcs. | | | | Send Enquiry | |
Ice Bucket | | Item Code:HL-4022 This ice bucket is made of a durable rigid material bearing excellent insultating properties. Contents can be stored in it using dry ice, liquid nitrogen or acetone etc.
Material :Polypropylene
| Code No. | Perticulars | Packing | | 11143 | Ice Bucket | 1 Pcs. | | | | Send Enquiry | |
Staining Box | | Item Code:HL-4023 Moulded in polypropylene, this staining box helps in stainin, fixing, de-staining and handling fragile electrophoresis gels and membranes. Box as well as cover will resist temperatures from -70° C to +70 ° C. The LDPE plug provides leakproof seal and allows easy liquid drainage.
Material :Polypropylene
| Code No. | Perticulars | Packing | | 11144 | 125 x 125 x 50 mm | 2 Pcs. | | | | Send Enquiry | |
Measuring Cylinders | | Item Code:HL-4024 Polylab measuring cylinders, moulded in Polypropylene, are single piece cylinders. These autoclavable cylinders have raised prominent graduations for easy reading and have excellent contact clarity. The broad base provides good stability.
Material : Polypropylene
| Code No. | Perticulars | Least Count | Packing | | 11145 | 10 ml | 0.2ml | 24Pcs. | | 11146 | 25ml | 0.5ml | 12Pcs. | | 11147 | 50ml | 1ml | 12Pcs. | | 11148 | 100ml | 1ml | 12Pcs. | | 11149 | 250ml | 2ml | 6Pcs. | | 11150 | 500ml | 5ml | 4Pcs. | | 11151 | 1000ml | 10ml | 3Pcs. | | 11152 | 2000ml | 20ml | 2Pcs. |
| | | Send Enquiry | |
Measuring Cylinders Hexagonal | | Item Code:HL-4025 Polylab measuring cylinders are now available with hexagonal base also. The hexagonal base provdes excellent stability to the cylinder where as teh tapered spout works really well while pouring any reagent.
Material : Polypropylene
| Code No. | Perticulars | Least Count | Packing | | 11153 | 10 ml | 0.2ml | 24Pcs. | | 11154 | 25ml | 0.5ml | 12Pcs. | | 11155 | 50ml | 1ml | 12Pcs. | | 11156 | 100ml | 1ml | 12Pcs. | | 11157 | 250ml | 2ml | 6Pcs. | | 11158 | 500ml | 5ml | 4Pcs. | | 11159 | 1000ml | 10ml | 3Pcs. | | | | Send Enquiry | |
Measuring Cylinders Pentagonal | | Item Code:HL-4026 Adding to the range of round & hexagonal base cylinders are the pentagonal ones. Polylab now offers you a wide ringe of cylinders with different bases to choose from. Prominently raised graduation &excellent contact clarity are among the other features of these cylinders.
Material : Polypropylene
| Code No. | Perticulars | Least Count | Packing | | 11160 | 10 ml | 0.2ml | 24Pcs. | | 11161 | 25ml | 0.5ml | 12Pcs. | | 11162 | 50ml | 1ml | 12Pcs. | | 11163 | 100ml | 1ml | 12Pcs. | | 11164 | 250ml | 2ml | 6Pcs. | | 11165 | 500ml | 5ml | 4Pcs. | | 11166 | 1000ml | 10ml | 3Pcs. | | | | Send Enquiry | |
Measuring Jugs | | Item Code:HL-4027 These handy jugs, moulded in polypropylene, are clear, autoclave and have good chemical resistance. These jugs are provided with a handle for easy & convenient lifting and have raised graduations for easy reading.
Material : Polypropylene
| Code No. | Perticulars | Least Count | Packing | | 11167 | 250ml | 10ml | 12Pcs. | | 11168 | 500ml | 10ml | 12Pcs. | | 11169 | 1000ml | 10ml | 6Pcs. | | 11170 | 2000ml | 20ml | 6Pcs. | | | | Send Enquiry | |
Measuring Jugs (Euro Design) | | Item Code:HL-4028 Adding to the existing range of polylab Jugs, these short form transparent jugs, made of polypropylene are autoclavable and have non-drip spout. These jugs have raised graduations, provide excellent contact clarity & are provided with excellent thumb grip on handle.
Material : Polypropylene
| Code No. | Perticulars | Packing | | 11171 | 500ml | 12Pcs. | | 11172 | 1000ml | 6Pcs. | | 11173 | 2000ml | 6Pcs. | | 11174 | 3000ml | 6Pcs. | | 11175 | 5000ml | 4Pcs. | | | | Send Enquiry | |
Conical Measures | | Item Code:HL-4029 These Conical Measures are very good for measuring small quantities of reagent. Moulded in Polypropylene, these autoclavable Measures have a hexagonal base which provides it excellent stability. The measures are clear, have good chemical resistance and have raised graduations for easy reading.
Material : Polypropylene
| Code No. | Perticulars | Least Count | Packing | | 11176 | 12ml | 1ml | 12Pcs. | | 11177 | 25ml | 1ml | 12Pcs. | | 11178 | 50ml | 2ml | 12Pcs. | | 11179 | 125ml | 5ml | 12Pcs. | | 11180 | 200ml | 5ml | 12Pcs. | | | | Send Enquiry | |
Seperatory Funnel | | Item Code:HL-4030 Polylab Seperatory Funnel is made of Polypropylene, giving it excellent contact clarity and strength. This pear shaped, autoclavable seperating funnel has a leakproof threaded screw cap. The Polypropylene stopcock, fitted with a self lubricating PTFE plug, is push fitted to the stem of the seperatory funnel.
Material :Polypropylene
| Code No. | Perticulars | Packing | | 11181 | 100ml | 2Pcs. | | 11182 | 250ml | 2Pcs. | | 11183 | 500ml | 2Pcs. | | | | Send Enquiry | |
Laboratory Spatula | | Item Code:HL-4031 Moulded in Polypropylene, Spatula consists of a spoon on one side while the other end is a flat construction with a knife edge. This edge is helpful in breaking up crystals of different salts while the spoon is used to draw salts from the containers.
Material :Polypropylene
| Code No. | Perticulars | Packing | | 11184 | 150mm | 12Pcs. | | 11185 | 200mm | 12Pcs. | | | | Send Enquiry | |
Cell Scraper | | Item Code:HL-4032 This cell scraper, as the name suggests, provides an excellent option for cell scraping purposes in microbiology.
Material :Polypropylene
| Code No. | Perticulars | Packing | | 11186 | 240mm | 10Pcs. | | 11187 | 300mm | 10Pcs. | | | | Send Enquiry | |
Petri Dish (Disposable) | | Item Code:HL-4033 These transparent, ready to use, disposable petri dishes are made of optical clear, non-toxic, Polystyrene. These Petri Dishes packed individually in Polyethylene bags sterlized by radiation / E.T.O.
Material :Polystyrene
| Code No. | Perticulars | Packing | | 11188 | 90mm Radiation Stz. | 460Pcs. | | 11189 | 60mm Radiation Stz. | 300Pcs. | | 11190 | 35mm Radiation Stz. | 500Pcs. | | | | Send Enquiry | |
Rack For Petri Dishes | | Item Code:HL-4034 These racks are clear acrylic construction with polycarbonate posts.69101 has a capacity to hold 60 petri dishes of 90 mm size while 69102 one can hold 56 petri dishes of 60mm. These racks are very useful during inoculation, incubation & Storage. Visibility from all sides enables the culture to be seen & checked during incubation.
Material :Acrylic / Polycarbonate
| Code No. | Perticulars | Packing | | 11191 | Rack for 90mm Petri Dishes | 2Pcs. | | 11192 | Rack for 60mm Petri Dishes | 2Pcs. | | | | Send Enquiry | |
Universal Multi Rack | | Item Code:HL-4035 This rack is an excellent lab apparatus compatible with different sizes of tubes. Four sides of this rack can be used for tubes of ¢30mm, ¢20mm, ¢17mm & ¢12mm
Material : Polycarbonate
| Code No. | Perticulars | Packing | | 11193 | Multi Rack | 6Pcs. | | | | Send Enquiry | |
Nestler Cylinder Stand | | Item Code:HL-4036 This stand as the name suggests is used for keeping nestler cylinders. Made of polypropylene, this stand is available in two sizes, one for 50ml nestler clinder & other for 100ml, nestler cylinder.
Material : Polycarbonate
| Code No. | Perticulars | Packing | | 11194 | 50ml | 6Pcs. | | 11195 | 100ml | 6Pcs. | | | | Send Enquiry | |
Test Tube Stand | | Item Code:HL-4037 This autoclavable stand is perhaphs the most commonly used test tube stand in various laboratories. For better visibility, this 6 place rack is end supported by 2 columns. The top plate has 2 holes for holding 25mm dia test tubes, four holes to hold 16mm dia tubes where as the base has corresponding hemispherical well. It also has six vertical pins fro drying tubes.
Another option available in this section is a test tube stand in which all the holes in the top plates can hold 25mm dia tubes.
Material :Polypropylene
| Code No. | Perticulars | Packing | | 11196 | 16mm & 25mm Ø Tubes | 12Pcs. | | 11197 | 25mm Ø Tubes | 12Pcs. | | | | Send Enquiry | |
Test Tube Stand (Round) | | Item Code:HL-4038 A handy, little, space saver, this circular twelve place Polypropylene Test Tube Stand has four 25mm dia holes & eight 19mm dia holes in its top plate. The base has matching hemispherical wells & 16 verticalpins for drying tubes surrounded by a trough to catch drippings. This autoclavable rack can be easily disassembled for cleaning purpose.
Material :Polypropylene
| Code No. | Perticulars | Packing | | 11198 | 19mm & 25mm Ø Tubes | 2Pcs. | | | | Send Enquiry | |
Rack For Micro Centrifuge Tubes | | Item Code:HL-4039 Moulded in Polycarbonate, these autoclavable racks are made for holding 1.5ml. micro centrifuge tubes. These racks have a unique stacking feature which prevents movement in any direction. The holes are numbered & lettered for easy identification.
Material :Polycarbonate
| Code No. | Perticulars | Packing | | 11199 | 24 Tubes | 4Pcs. | | 11199 A | 48 Tubes | 4Pcs. | | | | Send Enquiry | |
Test Tube Stand (3Tier) | | Item Code:HL-4040 These ingenious racks with a 3-tier design provide clear view of the tube contents & convenient insertion & removal of tubes. The PC rack has transparent upper & middle plates where as in PP racks, every part is coloured & opaque. These autoclavable racks can withstand sub-freezing temperatures.
Material :Polypropylene
| Code No. | Perticulars | Packing | | 11200 | 13mmX31Tubes | 2Pcs. | | 11201 | 16mmX31Tubes | 2Pcs. | | 11202 | 20mmX20Tubes | 2Pcs. | | 11203 | 25mmX12Tubes | 2Pcs. | | 11204 | 25mmX18Tubes | 2Pcs. | | 11205 | 32mmX12Tubes | 2Pcs. | | 11206 | 25mmX36Tubes | 2Pcs. | | 11207 | 13mmX18Tubes | 4Pcs. | | 11208 | 15mmX18Tubes | 4Pcs. | | 11209 | 18mmX12Tubes | 4Pcs. | | 11210 | 13mmX62Tubes | 2Pcs. | | 11211 | 16mmX62Tubes | 2Pcs. | | 11212 | 20mmX40Tubes | 2Pcs. | | 11213 | 13mmX48Tubes | 2Pcs. | | 11214 | 13mmX72Tubes | 2Pcs. | | | | Send Enquiry | |
Test Tube Stand (Wire Pattern) | | Item Code:HL-4041 An economical substitute for wire racks, here are these submersible, autoclavable racks which are stackable when empty. These are available in different colours and are made of a special blend of Polypropylene that makes it sink in a water bath and maintain their stability even in agitated water. These space saving racks can easily be disassembled for cleaning purpose. the base is in the form of a grid with square openings and fold up sides and end bars that lock into rack tops.
Material :Polypropylene
| Code No. | Perticulars | Packing | | 11215 | 13mmX90Tubes | 6Pcs. | | 11216 | 16mmX60Tubes | 6Pcs. | | 11217 | 20mmX40Tubes | 6Pcs. | | 11218 | 25mmX24Tubes | 6Pcs. | | | | Send Enquiry | |
Rack For Micro Centrifuge (Folding) | | Item Code:HL-4042 These two-tier versatile racks, made of polypropylene, are autoclavable & can be used dry, in water baths or in freezers. These racks ar provided with alpha numeric index for easy sample identification. Racks are stack able even when loaded and have purpose designed lable spaces on each side.
Material :Polypropylene
| Code No. | Particulars | Packing | | 11219 | 100 Places for 1.5ml MCT's | 6Pcs. | | | | Send Enquiry | |
Test Tube Baskets | | Item Code:HL-4043 Polylab test tube baskets are made of polypropylene. These autoclavable, unbreakable and non-corrosive baskets are ideal for rinsing & draining glassware. These are also useful for storage of test tubes or culture tubes during sterlization or incubation.
Material :polypropylene
| code no. | perticulars | packing | | 11220 | 140x120x110mm | 6pcs. | | 11221 | 160x160x160mm | 6pcs. | | | | Send Enquiry | |
Draining Baskets | | Item Code:HL-4044 As the name suggests, this basket with wide net like structure on all sides prove really usefully for draining different laboratory apparatus after washing them. Made of polypropylene, this basket can be repeatedly autoclaved.
Material :Polypropylene
| Code No. | Perticulars | Packing | | 11222 | 400X400X100mm | 6Pcs. | | | | Send Enquiry | |
Pipette Stand (Horizontal) | | Item Code:HL-4045 This detachable stand can hold 12 Pipettes, 6 on each side, in a horizontal position. Moulded in Polypropylene, this autoclavable stand has two sides which are attached to each other with three metallic rods coated with Polypropylene. This stand can be easily disassembbled for space saving storage.
Material :Polypropylene
| Code No. | Perticulars | Packing | | 11223 | For 12 Pipettes | 6Pcs. | | | | Send Enquiry | |
Pipette Stand (Vertical) | | Item Code:HL-4046 This is a stable, non-corrosive, detachable Stand which can hold 28 pipettes with maximum dia 14mm. The heavy base measures 225mm in diameter and a Polypropylene coated square rod measuring 375mm in length is screwed into the base. The top disc that can be fixed on the rod has holes for holding pipettes while the lower one has pilot holes where the pipette tips rest and liquids drain down to the base. These discs can be adjusted on the rod according to the length of the pipette. The arrows provided on the discs should be kept parallel to ensure that corresponding holes are being centered.
Material :Polypropylene
| Code No. | Perticulars | Packing | | 11224 | For 28Pipettes | 1Pcs. | | | | Send Enquiry | |
Storage Vial With O-Ring | | Item Code:HL-4047 This vial has an O-ring in the cap that makes it absolutely leakproof. Like other storage vials this vial can also be used for storage purposes at temperatures as low as -190°C.
Material :Polypropylene / Popyethylene
| Code No. | Perticulars | Packing | | 11225 | 2.0ml | 500Pcs. | | | | Send Enquiry | |
Storage Vial Internal Thread | | Item Code:HL-4048 Another addition to the range of storage vials is this vial which has internal thread in it. The cap fitted with an O-ring screws n to the vial and makes it a leak proof storage vial.
Material :Polypropylene / popyethylene
| Code No. | Perticulars | Packing | | 11226 | 2.0ml | 500Pcs. | | | | Send Enquiry | |
SV10-SV5 Storage Vial | | Item Code:HL-4049 These polyprolylene vials add to the existing range of polylab storage vials. Available in 5ml & 10ml capacities, these vials have polypropylene cap with built in seal ring making it a leakproof vial. Just like others storage vials these vials are also used for the storage of biological material, animal & human cells etc.
material :polypropylene
| code no. | perticulars | packing | | 11227 | sv-10ml | 500pcs. | | 11228 | sv-5ml | 500pcs. | | | | Send Enquiry | |
Scintillation Vial | | Item Code:HL-4050 These unbreakable vials, moulded in Polyethylene, are fitted with leakproof screw caps. These vials can be used with standard counting equipment for liquid scintillation system and are excellent for low activity count.
Material :High Density Polyethylene
| Code No. | Perticulars | Packing | | 11229 | 8ml | 100Pcs. | | 11230 | 20ml | 100Pcs. | | | | Send Enquiry | |
Rack For Scintillation Vial | | Item Code:HL-4051 These racks for scintillation vials, moulded in Polypropylene, are autoclavable & corrosion resistant. There ia an individual rack for both 8ml & 20ml vials. There rugged & stable racks can hold scintillation vials for convenient storage, handling & sample preperations.
Material :Polypropylene
| Code No. | Perticulars | Packing | | 11231 | Rack for 90 Vials of 8ml capacity | 2Pcs. | | 11232 | Rack for 50 Vials of 20ml capacity | 2Pcs. | | | | Send Enquiry | |
Cryo Vial- Internal Thread | | Item Code:HL-4052 Adding to the existing range of cryo vials is this vial which has internal thread in it. The cap fitted with an O-ring screws in to the vial and makes it a leakproof cryo vial. These vials are provided with white, prominent graduations and a long marking area for sample identification.
Material :Polypropylene / Popyethylene
| Code No. | Perticulars | Packing | | 11233 | 2.0ml | 500Pcs. | | | | Send Enquiry | |
Cryo Vial | | Item Code:HL-4053 Cryo vials are normally used for storage of biological material, human & animal cells at temperature as low as -190° C. These sterlized tubes are provided with white prominent graduations and a long marking area for sample identification. The cap of these vials is provided with a seal ring inside to make it completely leakproof. The longitudonal grooves in the base gives a non-twisting feature to these vials when placed in a cryo rack.
Material :Polypropylene / Popyethylene
| Code No. | Perticulars | Packing | | 11234 | 1.0ml | 1000Pcs. | | 11235 | 1.8ml | 1000Pcs. | | 11236 | 4.5ml | 500Pcs. | | | | Send Enquiry | |
Cryo Coders | | Item Code:HL-4054 These coders available in different colours can easily fit into the cap of cryo vials for colour identification of different samples.
Material :Polypropylene
| Code No. | Perticulars | Packing | | 11237 | Cryo Coders | 100Pcs. | | | | Send Enquiry | |
Cryo Rack | | Item Code:HL-4055 Polylab cryo rack is moulded in Polycarbonate making it tough, durable & autoclavable. This handy rack can hold 50 vials at a time. The unique feature of this rack is that vials can be unscrewed without actually picking them up as the vial will lock in every well and hence will not twist. This rack is provided with four anti skid rubbers & each well is identified with an alpha-numeric index.
Material :Polycarbonate
| Code No. | Perticulars | Packing | | 11238 | 50 places for 1, 1.8 & 4.5ml Cryo Vials | 2Pcs. | | | | Send Enquiry | |
Cryo Box (PC) | | Item Code:HL-4056 Polylab cryo boxes are moulded in polycarbonate making it extra strong and autoclavable. These can be accomadate cryo vials of upto 4.5ml capacity and are designed to be used at temperatures ranging from -190°C to +121°C. The transparent cover of the box gives a good view of the contents inside and is numbered for better inventory control.
Material :Polycarbonate
| Code No. | Perticulars | Packing | | 11239 | 81 Places for 1ml or 1.8ml Cryo Vials | 4Pcs. | | 11240 | 81 Places for 4.5ml Cryo Vials | 4Pcs. | | 11241 | 100 Places for 1ml or 1.8ml Cryo Vials | 4Pcs. | | | | Send Enquiry | |
Cryo Box (PP) | | Item Code:HL-4057 Moulded in polypropylene, the top of the box is attached to the bottom through well designed built-in hinges. The bottom has built - in spaces to hold vials up to 2ml. capacity. Available in two different sizes, these autoclavable boxes bear alpha numeric index for easy identification of different vials placed inside.
Material :Polycarbonate
| Code No. | Perticulars | Packing | | 11242 | 81 Places for 1ml or 1.8ml Cryo Vials | 4Pcs. | | 11243 | 81 Places for 4.5ml Cryo Vials | 4Pcs. | | | | Send Enquiry | |
Immunology Plates | | Item Code:HL-4058 Polylab ELISA/ASSAY plates are made of optical clear, non-toxic Polystyrene. These plates with 96U Bottom or flat bottom wells bear alpha-numeric index. Uniform placement of all the wells facilitate use of multi channel pipettes. These plates packed individually are available non-sterile as well as radiation sterilized.
Material :Polystyrene
| Code No. | Perticulars | Packing | | 11244 | Flat Bottom Elisa Plate | 72Pcs. | | 11245 | U Bottom Elisa Plate | 72Pcs. | | 11246 | Flat Bottom Assay Plate | 72Pcs. | | 11247 | U Bottom Assay Plate | 72Pcs. | | 11248 | Flat Bottom Elisa Plate-Sterile | 72Pcs. | | 11249 | U Bottom Elisa Plate-Sterile | 72Pcs. | | 11250 | Flat Bottom Assay Plate-Sterile | 72Pcs. | | 11251 | U Bottom Assay Plate-Sterile | 72Pcs. | | | | Send Enquiry | |
Micro Tip Box | | Item Code:HL-4059 These unique boxes are moulded in Polypropylene and are therefore autoclavable. The Box itself is clear providing an excellent view of the tipe inside while a table like structure is provided inside to hold the tips. The tip holding spaces are uniformaly placed to facilitate the use of multi channel pipettes. The cover is joined to the base through ball catcher hinges and provides excellent protection to the tips.
Material :Polypropylene
| Code No. | Perticulars | Packing | | 11252 | For 96 Micro-Tips of 2-200 µl | 6Pcs. | | 11253 | For 100 Micro-Tips of 200-1000µl | 6Pcs. | | | | Send Enquiry | |
Volumetric Flask | | Item Code:HL-4061 Polylab volumetric flasks, blown in polypropylene, are strong, unbreakable and have good contact clarity. These autoclavable flasks are provided with screw caps to prevent leakage.
Material :Polypropylene
| Code No. | Perticulars | Packing | | 11254 | 25ml | 6Pcs. | | 11255 | 50ml | 6Pcs. | | 11256 | 100ml | 6Pcs. | | 11257 | 250ml | 3Pcs. | | 11258 | 500ml | 3Pcs. | | 11259 | 1000ml | 2Pcs. | | | | Send Enquiry | |
Float Rack | | Item Code:HL-4062 This float rack moulded in polypropylene is quite compact, autoclavable and can hold 16 micro centrifuge tubes for incubation in water baths. Easy to load, these are essential in microbiology & immunology labs. The surface of the rack has raised alpha-numeric index for easy identification and has a central rod handle for convenient lifting.
Material :Polypropylene
| Code No. | Perticulars | Packing | | 11260 | 16MCT's of 1.5ml | 12Pcs. | | | | Send Enquiry | |
MCT Twin Rack | | Item Code:HL-4063 Polylab provides this twin purpose rack for both 0.5ml & 1.5ml micro centrifuge tubes. Each side has 108 holes for 0.5ml & 1.5ml MCT's respectively. The transparent top provides an excellent view as well as a protection cover for the tubes stored. Each face for the base has a unique alpha-numeric index for easy identification of the tube.
Material :Polypropylene
| Code No. | Perticulars | Packing | | 11261 | Rack for 0.5ml & 1.5ml MCT's | 4Pcs. | | | | Send Enquiry | |
PCR Tube Rack | | Item Code:HL-4064 This rack, as the name suggest, is used for keeping PCR tubes. Top & base of this rack are made of tough & transparent polycarbonate while the middle portion is made of polypropylene. The tube holding spaces are uniformly placed so as to facilitate the use of multipipettes. A no. of racks can be sacked together to save shelf space.
Material :Polycarbonate / Polypropylene
| Code No. | Perticulars | Packing | | 11262 | Rack for 96 PCR Tubes of 0.2ml | 4Pcs. | | | | Send Enquiry | |
MCT Box | | Item Code:HL-4065 MCT Boxes are moulded in polycarbonate and are therefore strong as well as autoclavable. One size can hold 64 MCT's of 1.5ml & the other can hold 100 MCT's of 0.5ml. These boxes are designed to work at temperatures ranging from -190°C to +121° C. The transparent cover provides a good view of the contents inside & is numbered for better inventory control.
Material :Polycarbonate
| Code No. | Perticulars | Packing | | 11263 | Rack for 100 MCT's of 0.5ml | 4Pcs. | | 11264 | Rack for 64 MCT's of 1.5ml | 4Pcs. | | | | Send Enquiry | |
Conical Bottom Centrifuge Tube | | Item Code:HL-4066 Polylab centrifuge tubes with conical bottom are available in two sizes i.e. 15ml & 50ml. Moulded in polypropylene, these tubes are clear, strong and safe. These autoclavable tubes are provided with printed graduations on the outer surface. The built in seal ring in the cap makes these tubes absolutely leakproof. These tubes can withstand forces upto 7500xG & 12000xG for 15ml abd 50ml tubes respectively. These tubes are available sterilized as well as non-sterlized.
Material :Polypropylene
| Code No. | Perticulars | Packing | | 11265 | 15ml | 100Pcs. | | 11266 | 50ml | 100Pcs. | | 11267 | 15ml-Sterile | 100Pcs. | | 11268 | 50ml-Sterile | 100Pcs. | | | | Send Enquiry | |
Centrifuge Tube Round Bottom | | Item Code:HL-4067 Polylab Centrifuge Tubes with round bottom are moulded in Polypropylene & Polycarbonate. these tubes have excellent clarity and re strong enough to be used upto 50,000 x G. These tubes can be autoclaved, however, repeatd autoclaving in PC tubes reduces their mechanical
Material :Polypropylene / Polycarbonate
| Code No. | Perticulars | Packing | | 11269 | 16ml Cent. Tube PP. | 50Pcs. | | 11270 | 50ml Cent. Tube PP. | 50Pcs. | | 11271 | 16ml Cent. Tube PC. | 25Pcs. | | 11272 | 50ml Cent. Tube PC. | 25Pcs. | | 11273 | Cap for 16ml Cent. Tube | 100Pcs. | | 11274 | Cap for 50ml Cent. Tube | 100Pcs. | | | | Send Enquiry | |
Oak Ridge Centrifuge Tubes | | Item Code:HL-4068 Oak ridge centrifuge tubes, made of polypropylene, have excellent contact clarity and can be used upto 50000xG. The screw cap is fitted with silicon O-Ring making it totally leakproof. These tubes should not be used below 4°C.
Material :Polypropylene
| Code No. | Perticulars | Packing | | 11275 | 30ml | 12Pcs. | | 11276 | 50ml | 12Pcs. | | 11277 | 100ml | 12Pcs. | | | | Send Enquiry | |
Urine Container | | Item Code:HL-4069 These containers can be used for collecting a wide range of samples of sputum, urine etc. Moulded in polypropylene these container have excellent contact clarity and the cap has built in seal that makes it completely leakproof.
Material :Polypropylene
| Code No. | Perticulars | Packing | | 11278 | 30ml | 100Pcs. | | 11279 | 50ml | 100Pcs. | | | | Send Enquiry | |
Stool Container | | Item Code:HL-4070 These containers, as the name suggests, are used for collecting stool samples. The cap is provided with a spoon like structure that proves helpful in lifting samples.
Material :Polypropylene
| Code No. | Particular | Packing | | 11280 | 30ml | 100Pcs. | | 11281 | 50ml | 100Pcs. | | | | Send Enquiry | |
Stool Container | | Item Code:HL-4071 In addition to the range the range of existing sample containers, this Stool Container has the unique feature of one piece moulded cap-spoon combination.
Material :Polypropylene
| Code No. | Perticulars | Packing | | 11282 | 25ml | 100Pcs. | | | | Send Enquiry | |
Ria Vial | | Item Code:HL-4072 These polypropylene / polystyrene tubes are generally used in RIA, coagulation & becteriology. The polyproplene tubes are clear and can withstand 3000 RCF during centrifugation while the transparent polystyrene tubes can withstand 1400 RCF. The PP tubes can accept common acids, alkalies and solvents at room temperature while the PS tubes can accept mild bases, weak acids but not organic solvants.
Material :Polypropylene / Polystyrene
| Code No. | Perticulars | Packing | | 11283 | 12 x 75mm/PS | 500Pcs. | | 11284 | 12 x 75mm/PP | 500Pcs. | | 11285 | Cap for 12mm RIA Tube | 100Pcs. | | | | Send Enquiry | |
Ria Vial With Screw Cap | | Item Code:HL-4073 These polypropylene vials are unique because the cap fitted with an O ring can be screwed into the vial making it a leak proof vial which can be used in RIA, Coagulation & Bacteriology etc.
Material :Polypropylene / Polystyrene
| Code No. | Particular | Packing | | 11286 | 12 x 75mm Int. Thread | 500Pcs. | | | | Send Enquiry | |
Test Tube Cap | | Item Code:HL-4075 This transparent polypropylene cap for test tubes proves to be an excellent protection to the contents to the tubes. The grooves inside the cap tighten the fitting on the tube while the outer groove would hold identification labels. The built in seal ring would set in the tube making the combination a leak proof one.
Material :Polypropylene
| Code No. | Particulars | Packing | | 11288 | Cap for Test Tube ø 25mm | 100Pcs. | | | | Send Enquiry | |
Storage Vial | | Item Code:HL-4076 As the name suggest, these vials are commonly used for storage of biological material, human & animal cells at temperature as low as -190°C. The Cap is provided with a built in seal ring making the vial leak proof. The base of the vial has longitudional grooves which gives it a non-twisting character when placed in a vial rack.
Material :Polypropylene / popyethylene
| Code No. | Particulars | Packing | | 11289 | 1.0ml | 500Pcs. | | 11290 | 2.0ml | 500Pcs. | | 11291 | 5.0ml | 500Pcs. | | | | Send Enquiry | |
Desiccator (Plain) | | Item Code:HL-4077 Plain Desiccators are physically the same as Vaccum Desiccator. Only difference is the absence of stop cock. Grease should be applied on the flanges to make it air tight. Both Vaccume & Plain Desiccators are provided with a thick perforated Polypropylene disc with a big hole in the centre for easy lifting. The tiny hles in the disc provide air troughs & support to the diswhes. However procelain discs are advisable in case of incandescent crucibles.
Material :Polypropylene / Polycarbonate
| Code No. | Perticulars | Flange O.D. | I.D | Packing | | 11292 | 150mm | 171mm | 150mm | 1Pc. | | 11293 | 200mm | 232mm | 199mm | 1Pc. | | 11294 | 250mm | 276mm | 240mm | 1Pc. | | 11295 | 300mm | 340mm | 300mm | 1Pc. | | | | Send Enquiry | |
Stop Cocks | | Item Code:HL-4078 These polypropylene Stop Cocks are fitted with a Poly Tetra Flouro Ethylene (PTFE) plug & have serrated tabulations that accept from 6mm to 10mm tubing. These Stop Cocks are absolutely leak proof and are available in two different options i.e. 2 ways & 3 ways.
Material :Polypropylene / Poly Tetra Flouro Ethylene(PTFE)
| Code No. | Particular | Packing | | 11296 | Stop Cock 2 Way | 6Pcs. | | 11297 | Stop Cock 3 Way | 6Pcs. | | | | Send Enquiry | |
Kipp's Apparatus | | Item Code:HL-4080 Polylab kipp's apparatus made of polyethylene has three main portions. The top portion is fitted with a thistle funnel and a bulb structure through which dilute funnel and a bulb structure through which dilute acid can be poured which reacts with a metal sulphate in the base of the Apparatus. Hydrogen Sulphide gas then evolved collects in the middle dome from where it can be released through a leakproof stopcock fitted with a self lubricating Poly Tetra Flouro Ethylene (PTFE) plug. The base is provided with a residual outlet fitted with a cap for easy cleaning.
Material :High Density Polyethylene
| Code No. | Perticulars | Packing | | 11298 | 250ml | 1Pc. | | 11299 | 500ml | 1Pc. | | 11300 | 1000ml | 1Pc. | | | | Send Enquiry | |
Funnels - Long Stem | | Item Code:HL-4081 These Long Stem funnels have smooth walls, 60° cone angle and external ribs to prevent air lock. Moulded in Polypropylene, these clear funnels can also be steam autoclaved.
Material :Polypropylene
| Code No. | Perticulars | Inside Ø | Stem Length | Packing | | 11301 | 50mm | 50 | 39 | 72Pcs. | | 11302 | 62mm | 61 | 67 | 36Pcs. | | 11303 | 75mm | 74 | 69 | 36Pcs. | | 11304 | 100mm | 93 | 84 | 36Pcs. | | 11305 | 150mm | 148 | 55 | 12Pcs. | | | | Send Enquiry | |
Buchner Funnel | | Item Code:HL-4082 Moulded in Polypropylene, these two piece funnels are light weight, easy to clean & autoclavable. The top portion can be snap fitted with the lower one forming a vaccum seal which does not require greasing. The base of the top portion has a perforated filter plate.
Material :Polypropylene
| Code No. | Perticulars | Packing | | 11306 | 70mm | 12Pcs. | | 11307 | 110mm | 6Pcs. | | | | Send Enquiry | |
Analytical Funnel | | Item Code:HL-4083 Designed specifically for analytical chemistry, the body of the funnels is 60° . Moulded in PP, these funnels are provided with internal & external ribs to prevent air blockage.
Material :Polypropylene
| Code No. | Perticulars | Inside ¢ | Stem Length | Packing | | 11308 | 50mm | 50 | 50 | 72Pcs. | | 11309 | 62mm | 62 | 67 | 36Pcs. | | 11310 | 75mm | 75 | 77 | 36Pcs. | | 11311 | 100mm | 100 | 95 | 36Pcs. | | | | Send Enquiry | |
Petri Dish | | Item Code:HL-4084 These polypropylene petri dishes are clear, unbreakable & autoclavable.
Material :Polypropylene
| Code No. | Perticulars | Packing | | 11312 | 50mm | 36Pcs. | | 11313 | 75mm | 36Pcs. | | 11314 | 100mm | 36Pcs. | | 11315 | 125mm | 12Pcs. | | 11316 | 150mm | 12Pcs. | | | | Send Enquiry | |
Petri Dish (Culture) | | Item Code:HL-4085 Newly added PS petri dish with fitting proves excellent for culture exp. Made in polystyrene, this transparent petri dish provides excellent inside view.
Material :Polypropylene
| Code No. | Perticulars | Packing | | 11317 | Petri Dish | 12Pcs. | | | | Send Enquiry | |
Atomic Model Set | | Item Code:HL-4086 Atomic model set These sets consist of moulded balls of different colours and sizes along with connecting lugs of different sizes. These sets are very helpful in modelling different organic & Inorganic compounds.
Senior set : This set consists of 150 lugs & 370 balls of prescribed colours and sizes packed in a moulded box having seperate space for every particular colour & size of ball.
Junior set : This set consists of 30 connecting lugs and 75 balls of different colours and sizes.
Material :Polystyrene | Code No. | Particulars | Packing | | 11318 | Senior Set | 1Pc. | | 11319 | Junior Set | 1Pc. | | | | Send Enquiry | |
Atomic Model Set (Euro Design) | | Item Code:HL-4087 These sets consist of moulded balls of different colours and sizes along with connectors of different sizes. The sizes & shapes of the balls & connecting lugs have been designed in accordance with internationally acceptable standards
Material :Polystyrene
| Code No. | Perticulars | Packing | | 11320 | Senior Set | 1Pc. | | 11321 | Junior Set | 1Pc. | | | | Send Enquiry | |
Crystal Model Set | | Item Code:HL-4088 These crystal model sets contain different coloured jacks (red, black & white) & connectors (long & short) in a prescribed number to be joined together in an illustraded way to form structures like diamond, graphite & sodium chloride.
material :polyethylene
| code no. | Perticulars | packing | | 11322 | Diamond | 1pc. | | 11323 | Sodiumchloride | 1pc. | | 11324 | Graphite | 1pc. | | | | Send Enquiry | |
Coplin Jar | | Item Code:HL-4089 Polylab coplin jar made of polypropylene can hold 10 slides of the size 1"x3" back to back. The interior of the coplin jar is grooved in a way to hold slides in erect position. Domed & shallow thread screw cap provides protection to the slides.
material :polypropylene
| Code no. | perticulars | packing | | 11325 | coplin jar | 12pcs. | | | | Send Enquiry | |
Test Tube With Screw Cap |  |  |
| |
Item Code:HL-4074 These polypropylene tubes excellent option for RIA, coagulation & bacteriology etc. The cap in screwed on to the tube & hence this tube can be filled up to the brim. Material :Polypropylene / Polystyrene | Code No. | Perticulars | Packing | | 11287 | 16 x100mm Ext. Thread | 500Pcs. | | |
|
|
|
|
© H. L. Scientific Industries. All Rights Reserved (Terms of Use)